Update Widths/Spacings Error Report

The Update Widths/Spacings Error Report dialog is displayed if errors or warnings are generated by the Update Widths/Spacings command. This command updates a selected trunk so that it complies with the track width and clearance specified by the design rules. It can also update a trunk system in order to follow a topology template. Launch the Update Widths/Spacings command from the assist menu of the Regulate Trunk command.

Value	Description
Errors box	If the following problems are encountered when updating the widths and spacings of the tracks within a trunk, then an error or warning message is displayed. The differential pair is not fully routed. The differential pair does not follow the branches of the assigned topology, or an invalid topology is applied. A DRC error is encountered. The differential pair has a fixed trunk item. The following details are displayed. The name of the differential pair. The position and layer of the fixed track or via. The differential pair has more than one trunk system. The following details are displayed. The name of the differential pair. The position of the trunk terminal that must be connected to the other trunk. The layer of the trunk terminal. The trunk is too short, which prevents the new widths and spacings being applied. The following details are displayed. The name of the differential pair. The position of the trunk that must be extended. The layer of the trunk segment. Note A warning message is not shown if a constrained pin pair length is not met.
Save As	Saves the contents of the dialog to a location that you specify. You can select from the following formats. .txt .rep .log .htm .html
Print	Prints the errors and warnings displayed in this dialog.
Close	Closes the Update Widths/Spacings Error Report dialog. Alternatively, press Esc on the keyboard.