Receiving an Object Selected in other eCADSTAR Applications
An object selected in other eCADSTAR applications, such as eCADSTAR Schematic Editor, PI/EMI Analysis, Electrical Editor, etc., can be received when cross probing. The object is selected on the eCADSTAR PCB Editor canvas or in the Constraint Browser, and then can be processed by a command.
Receiving an Object Selected in other eCADSTAR applications on the Canvas or in the Constraint Browser
- Release the current selection by exiting the active command.
- In eCADSTAR Schematic Editor, PI/EMI Analysis, Electrical Editor or Analysis Results Viewer, select an object, and then send it using the local cross probe function. The object is selected in the tree view on the canvas and in the Constraint Browser. Objects that were previously selected are deselected.
Objects that can be selected on the canvas
Information received | Objects selected |
---|---|
Net | Objects belonging to the net |
Pin | Objects belonging to the pin |
Component | Component |
Objects that can be selected in the Constraint Browser
Information received | Objects selected |
---|---|
Net |
|
Pin | Pin |
Component | Component |
Using the Input Track Command to Route Nets and Pins Selected in eCADSTAR Schematic Editor
- Start the Input Track command.
- In eCADSTAR Schematic Editor, select a net or pin, and then send it. A track is taken out from the sent object.
Processing Nets Selected in eCADSTAR Schematic Editor Using an Active Command
- Start one of the following commands.
Commands list
Command | Processing contents |
---|---|
Edit Area Fill, Area Fill (Polygon/Rectangle/Circle/Arc) | Process as a net to be entered |
Line (Polyline/Rectangle/Circle/Arc/Segment/Tangent) | Process as a net to be entered |
Padstack | Process as a net to be entered |
Pad | Process as a net to be entered |
Input Testpoint | Process as a net to be entered |
Offset | Process as a net to be entered |
Generate Area from Line | Process as a net to be entered |
Generate Outline | Process as a net to be entered |
Move (Drag/Relative/Rotate/Flip/Interlayer Move) | Process as a net to be entered |
Duplicate (Drag/Relative/Rotate/Flip/Interlayer Move) | Process as a net to be entered |
Paste | Process as a net to be entered |
Generate Net | Process as a net to be generated |
Delete Net | Process as a net to be removed (if no object exists in the net) |
- In eCADSTAR Schematic Editor, select a net, then send it. The net is processed after it is sent.
Receiving a Component Selected in eCADSTAR Schematic Editor Using an Active Command
- Start one of the following commands.
- Move
- Move (Relative, Rotate, Interlayer Move)
- Rotate Around Reference Point
- Gather Components
- Align Components
- Arrange Components
- Change Reference
- Input component symbol
- Change Part
- Change Footprint
- In eCADSTAR Schematic Editor, select a component and send it.
- On the canvas, the component is selected.
- Previously-selected components are deselected.
Setting the Operation after Selecting an Object on the Canvas
- In the Design Settings dialog, specify the operation after an object on the canvas is selected from outside the canvas.
Clearing the Highlighted object in PCB Editor after cross probing form Electrical Editor
- To clear the highlighted object on the >eCADSTAR PCB Editor canvas, select
Clear Highlight on Canvas in View > Canvas View Settings split icon on the eCADSTAR PCB Editor ribbon.
- Alternatively select
Clear Highlight on Canvas on the Quick Access Toolbar.
Note
- In Constraint Browser, an object in the currently-displayed tree view is selected.
- If the trunking or Activ-45 route is turned on and drawn using the Routing command, the object cannot be switched to another object by cross probing.
- You cannot send the current selection to Component Browser using the Auto Send command.